|
| |
| Pfl Air Gauge Unit |
FEATURES:
- Every gauge carries a calibration certificate giving actual values
- Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor
- High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time
- Non-contact gauging: long life due to minimal frictional wear
- Two setting Masters: ensures correct magnification of reading at all times
- System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit
- Minimum line pressure required 4.5 bars (67 psi)
- Air consumption 46 LPM
- For diameter 6 mm and above Module-1A air gauge unit is to be used
- For diameter below 6 mm Module-2A air gauge unit is to be used
|
|
|
|
|
| Universal Air Gauge Unit |
FEATURES:
- Every gauge carries a calibration certificate giving actual values
- Accommodates all jet diameters of Air Plug Gauges, Air Ring Gauges & Air Calipers
- Facilitates quick & easy setting through Mag & Zero knobs
- Supplied with a fixed adaptor which fits all types of connectors
- Foldable feet for better Readability
- High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time
- Non-contact Gauging: long life due to minimal frictional wear
- Two Setting Masters: ensures correct magnification of reading at all times
- System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit
- Minimum line pressure required 4.5 bars (67 psi)
- Air consumption 46 LPM
|
|
|
|
|
| Air Electronic Converter Module Aecm |
FEATURES:
- Combined advantages of non-contact air sensing and high precision electronics
- RS232 data output available for further processing like machine control through relay output or for SPC
- Can be supplied with analogue, column or digital readout units
- For diameter 6 mm and above AECM1 is to be used
- For diameter below 6 mm AECM2 is to be used
|
|
|
|
|
| Microprocessor Based Digital Gauge |
FEATURES:
- Seven segment, 6 character, 3 colour LED display, ½ inch tall
- Air-Electronic input from BAKER Air Plug and Ring Gauges (APG & ARG)
- Two metric measuring ranges: 200µm (resolution 0.1µm), 2000µm (resolution 1µm), and two Inch measuring ranges: 20.0 thou (resolution 0.01 thou) & 200 thou (resolution 0.1 thou)
- Measurement display in absolute or comparative form
- Auto calibration with two setting masters
- Keyboard entered upper & lower tolerance limits (UTL & LTL), applicable to the values displayed
- Static or dynamic (max, min, average & TIR) measurements
- Non-volatile storage of all menu entered values
- Available in 1 / 2 / 3 or 4 independent channels
- Combined advantages of non-contact air sensing and high precision electronics
- RS232 data output available for further processing like machine control through relay output or for SPC
|
|
|
|
|
| Microprocessor Based Column Gauge |
FEATURES:
- Air electronic Units are a combination of two highly reliable Systems to give combined advantages of non-contact, self-cleaning and advantage of high precision electronics
- Accommodates all BAKER jet diameter of Air Plug Gauges, Air Ring Gauges & Air Calipers
- Improved linearity
- Faster response
- Easy to calibrate
- The slim design makes it very convenient for
- multi-gauging as they can be banked within a small space
- Supplied with quick connecting adaptors to suit all BAKER Air Plugs/Air Rings/Air Cali-pers
- With Calibration certificate
|
|
|
|
|
| Air Plug Gauge |
FEATURES:
- Quick and easy checking of bore
- Standard 2 jets for checking size, taper, ovality
- 3 jets at 120 degree for average size & tri-lobed effect (for diameter 6 mm & above)
- With extensions to check deeper bores
- Can be supplied to check through or blind bores
- Can be supplied with multiple jets
- Hard chrome plated for extended life
- Can be supplied with carbide sleeve on request
- For specific depth or land width checking, adjustable depth collars can be provided
|
|
|
|
|
| Setting Rings For Air Plug Gauge |
FEATURES:
- Used for setting of pneumatic length measuring instruments
- Made from oil hardening non shrinking gauge steel, hardened and tempered to 60-62 HRC
- Subzero treated at -80°C for long term dimensional stability
- Actual dimensions duly etched
- Calibrated at 20°C under Standards Room conditions against National/International traceable standards
- Certificate of calibration is provided along with each master traceable to National/International standards. Certificate under NABL (as per ISO 17025) as per request
- Manufactured as per DIN2250-1 Type B
|
|
|
|
|
| Air Ring Gauge |
FEATURES:
- Two Jet Air Ring gauge to check outside diameter, taper & ovality
- Three jet Air Ring gauge for detecting tri-lobed effect for diameter above 6 mm only
- Can be supplied with tungsten carbide sleeve on request for checking hardened job
- Can be supplied with multiple jets
|
|
|
|
|
| Setting Plug Air Ring Gauge |
| Description / Specification of Setting Plug Air Ring Gauge |
|
We are involved in offering a wide range of Setting Plug Air Ring Gauge to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Setting Plug Air Ring Gauge. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
- Sturdy design
- Highly durable
- Application specific design
|
| |
|
|
|
|
|
|
| Air Caliper |
FEATURES:
- Air calipers are ideal for measuring diameters of jobs held between the centers on machine or interrupted shafts like crankshafts
- “V” support for perfect centering and stability
- ‘’V” support with tungsten carbide pads for diameter above 16 mm
- Ideal for collared diameters i.e. crankshaft pin and journal
- Multi-jet air calipers available for multi-point measurement i.e. to check crowning of crank pins and journal diameters
- Can be supplied bench mounted for checking small diameters or against specific needs
|
|
|
|
|
| Setting Disc For Air Caliper |
| Description / Specification of Setting Disc For Air Caliper |
|
We are involved in offering a wide range of Setting Disc For Air Caliper to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Setting Disc For Air Caliper. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
- Sturdy design
- Highly durable
- Application specific design
|
| |
|
|
|
|
|
|
|
|
|
|
